Description
The MERCUSYS MS110CMP is an unmanaged PoE+ Ethernet switch designed to simplify network deployment by delivering both network data and electrical power through standard Ethernet cabling.
It provides 10 Ethernet interfaces in total: 8 × 10/100 Mbps PoE+ ports for powered devices and 2 × Gigabit Ethernet non-PoE ports for high-speed uplink connections. This configuration is particularly useful in surveillance systems where multiple cameras connect to the switch while a router and NVR use the two Gigabit uplinks.
Eight PoE+ Ports
Ports 1–8 support IEEE 802.3af/at compliant Powered Devices, allowing compatible equipment to receive both power and network connectivity through a single Ethernet cable.
Typical compatible devices include:
- IP Cameras
- Wireless Access Points
- IP Phones
- Other IEEE 802.3af/at Powered Devices
Each PoE+ port can provide up to 30 W, subject to the switch's total 115 W PoE budget.
Powerful 115 W PoE Budget
The MS110CMP provides a total PoE power budget of 115 W across ports 1–8.
This higher power capacity makes it suitable for larger PoE installations than lower-budget switches and allows several compatible cameras, access points, or phones to operate simultaneously.
Two Gigabit Uplink Ports
Ports 9 and 10 are Gigabit Ethernet non-PoE ports, providing faster uplink connectivity than the eight 10/100 Mbps PoE ports.
MERCUSYS specifically describes the two Gigabit uplinks as suitable for:
- Internet Router / Gateway
- Network Video Recorder — NVR
This helps prevent the uplink connection itself from being restricted to Fast Ethernet speeds.
Extend Mode up to 250 Meters
Extend Mode increases supported PoE transmission distance to as much as 250 meters, making the switch useful for cameras positioned far from the central network equipment.
The rear hardware selector supports long-range operation, while MERCUSYS notes that ports operating in Extend Mode are reduced to 10 Mbps. Actual range depends on Ethernet cable type, quality, and PoE-device power consumption.
Isolation Mode
Isolation Mode separates traffic between PoE ports 1–8, helping prevent direct communication between connected devices and reducing the effects of broadcast traffic.
The two Gigabit ports can remain available as uplinks, making this feature particularly useful for surveillance deployments with several IP cameras connected to an NVR or router.
PoE Auto Recovery
The MS110CMP includes PoE Auto Recovery, which monitors connected PoE devices.
If a supported powered device becomes unresponsive and stops sending data for an extended period, the switch can automatically restart it by cycling PoE power, reducing the need for manual intervention.
Plug & Play
No network management software or advanced configuration is required.
The switch supports Auto-Negotiation and Auto-MDI/MDIX, allowing users to connect compatible Ethernet devices and begin using the network immediately.
Durable Metal Housing
The MS110CMP uses a durable metal enclosure designed to support efficient heat dissipation, stable operation, and long-term use.
Its fanless design provides silent operation, while support for both desktop and wall-mounted installation provides flexibility for different network environments.
Key Features
- 10-Port Desktop PoE+ Ethernet Switch
- 8 × 10/100 Mbps PoE+ RJ45 Ports
- 2 × Gigabit Ethernet Non-PoE Uplink Ports
- IEEE 802.3af / IEEE 802.3at Compatible
- Up to 30 W per PoE Port
- 115 W Total PoE Budget
- Extend Mode up to 250 m
- Isolation Mode
- PoE Auto Recovery
- Auto-Negotiation
- Auto-MDI/MDIX
- IEEE 802.3x Flow Control
- Store-and-Forward Switching
- 5.6 Gbps Switching Capacity
- 2K MAC Address Table
- Automatic MAC Learning
- Automatic MAC Aging
- 2 KB Jumbo Frame
- Plug & Play
- Durable Metal Housing
- Fanless Silent Operation
- Desktop Installation
- Wall Mounting
- Power / Link-Activity / PoE Status Indicators
Technical Specifications
| Brand | MERCUSYS |
|---|---|
| Model | MS110CMP |
| Reference Hardware Version | V1 |
| Product Type | Unmanaged PoE+ Desktop Switch |
| Total Ethernet Ports | 10 |
| PoE+ Ports | 8 × 10/100 Mbps RJ45 |
| PoE Port Numbers | Ports 1–8 |
| Non-PoE / Uplink Ports | 2 × 1000 Mbps Gigabit RJ45 |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE Power per Port | Up to 30 W |
| Total PoE Budget | 115 W |
| Auto-Negotiation | Supported |
| Auto-MDI/MDIX | Supported |
| Switching Capacity | 5.6 Gbps |
| MAC Address Table | 2K |
| MAC Learning | Automatic |
| MAC Aging | Automatic |
| Jumbo Frame | 2 KB |
| Forwarding Method | Store-and-Forward |
| Flow Control | IEEE 802.3x |
| Extend Mode | Supported, up to 250 m |
| Extend Mode Speed | 10 Mbps |
| Isolation Mode | Supported |
| PoE Auto Recovery | Supported |
| Cooling | Fanless |
| Enclosure | Metal / Steel |
| Installation | Desktop / Wall Mount |
| Power Adapter Output | 54V / 2.2A |
| Dimensions | 171 × 98 × 27 mm |
| Certification | CE / RoHS |
| Operating Temperature | -10°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Humidity | 5%–90% RH, Non-Condensing |
Main Benefits
Eight PoE+ Device Connections
Eight powered Ethernet ports provide enough connectivity for a larger camera or access-point deployment than typical four-port PoE switches.
Higher 115 W PoE Capacity
The 115 W shared power budget gives the MS110CMP more room for multiple PoE devices and higher combined power requirements.
Two Gigabit Uplinks
The two dedicated Gigabit data ports help provide faster connectivity between the PoE switch and devices such as a router or NVR.
Power and Data Through One Cable
PoE+ allows compatible devices to receive Ethernet data and electrical power through a single cable, reducing cabling requirements and the need for nearby electrical outlets.
Long-Range Camera Deployment
Extend Mode increases supported PoE transmission distance to up to 250 meters, making remote IP-camera installation easier.
Automatic Device Recovery
PoE Auto Recovery can reboot supported unresponsive PoE devices automatically, helping reduce manual maintenance and downtime.
Improved Surveillance Isolation
Isolation Mode separates downlink PoE traffic, which can improve stability and traffic control in camera networks.
Silent and Durable
The fanless metal chassis provides passive cooling without fan noise and supports long-term fixed installations.
Recommended Uses
- CCTV Surveillance Systems
- IP Camera Networks
- Network Video Recorders — NVR
- Wireless Access Points
- IP Phones
- Small and Medium Businesses
- Retail Stores
- Restaurants and Cafés
- Offices
- Dormitories
- Warehouses
- Parking Areas
- Home Surveillance Systems
- Long-Distance PoE Deployments
- Wall-Mounted Network Installations
Package Contents
- 1 × MERCUSYS MS110CMP PoE+ Switch
- 1 × Power Adapter
- Rubber Feet
- 1 × Quick Installation Guide




Reviews
There are no reviews yet.