Description
The MERCUSYS MS110GMP is an unmanaged Gigabit PoE+ Ethernet switch designed to deliver both high-speed network data and electrical power through standard Ethernet cabling.
It provides 10 Gigabit RJ45 ports in total. Ports 1–8 support PoE+, while the remaining two Gigabit ports serve as data/uplink interfaces, allowing the switch to connect several powered devices while maintaining high-speed connections to a router, NVR, server, or upstream network.
Eight Gigabit PoE+ Ports
Ports 1–8 support IEEE 802.3af/at compliant Powered Devices and can carry network data and electrical power through a single Ethernet cable.
Typical compatible devices include:
- IP Cameras
- Wireless Access Points
- IP Phones
- Other IEEE 802.3af/at Powered Devices
Each PoE+ port supports up to 30 W, subject to the total available 111 W PoE budget.
111 W Total PoE Budget
The MS110GMP provides a substantial 111 W shared PoE power budget, making it suitable for larger camera, access-point, and business networking installations than lower-power desktop PoE switches.
MERCUSYS notes that the advertised PoE budget is based on laboratory testing and actual available power can vary depending on connected devices and environmental conditions.
Ten Full Gigabit Ethernet Ports
All ten Ethernet interfaces support Gigabit networking. The official specification lists:
- 8 × 10/100/1000 Mbps PoE+ Ports
- 2 × 1000 Mbps Gigabit Uplink Ports
The interfaces support Auto-Negotiation and Auto-MDI/MDIX, simplifying deployment with compatible Ethernet devices.
20 Gbps Switching Capacity
The MS110GMP provides up to 20 Gbps switching capacity with a packet forwarding rate of approximately 14.88 Mpps, helping it handle simultaneous Gigabit traffic across multiple connected devices.
Extend Mode up to 250 Meters
Enable Extend Mode to increase supported PoE power and data transmission distance to up to 250 meters.
This is useful when surveillance cameras or other PoE devices must be installed far from the switch.
When Extend Mode is active, the relevant ports are reduced to 10 Mbps. Actual transmission distance varies according to cable quality, cable type, and PoE-device power requirements.
Priority Ports 1–2
Priority Mode gives ports 1 and 2 higher priority to help maintain the quality of sensitive network applications such as voice and video when network traffic becomes congested.
Isolation Mode
Isolation Mode separates client traffic between designated PoE port groups, helping reduce unwanted communication and broadcast interference.
The official V1 specification lists isolation for ports 1–4 and ports 5–8, making it particularly useful for camera and surveillance deployments.
PoE Auto Recovery
The MS110GMP includes PoE Auto Recovery, allowing it to automatically reboot certain unresponsive PoE-powered devices.
This can reduce the need to physically disconnect cameras or access points when they stop communicating.
Intelligent PoE Power Priority
If connected PoE devices exceed the switch's total power budget, the system gives lower-numbered ports higher power priority and can cut power to higher-numbered ports first.
This helps maintain power to priority equipment when total demand exceeds the available PoE budget.
Durable Metal Housing
The MS110GMP uses a durable metal enclosure and a fanless cooling design.
MERCUSYS supports both desktop placement and wall mounting, making the switch suitable for fixed surveillance and business installations.
Key Features
- 10-Port Gigabit Desktop PoE+ Switch
- 8 × 10/100/1000 Mbps Gigabit PoE+ Ports
- 2 × Gigabit Uplink Ports
- IEEE 802.3af / IEEE 802.3at Compatible
- Up to 30 W per PoE Port
- 111 W Total PoE Budget
- 20 Gbps Switching Capacity
- 14.88 Mpps Packet Forwarding Rate
- Extend Mode up to 250 m
- Priority Mode — Ports 1–2
- Isolation Mode
- PoE Auto Recovery
- Auto-Negotiation
- Auto-MDI/MDIX
- IEEE 802.3x Flow Control
- Store-and-Forward Switching
- 4K MAC Address Table
- Automatic MAC Learning
- Automatic MAC Aging
- 16 KB Jumbo Frame
- Plug & Play
- No Configuration Required
- Durable Metal Housing
- Fanless Silent Operation
- Desktop Installation
- Wall Mounting
- Physical Security Lock
Technical Specifications
| Brand | MERCUSYS |
|---|---|
| Model | MS110GMP |
| Reference Hardware Version | V1 |
| Product Type | Unmanaged Gigabit PoE+ Switch |
| Total Ethernet Ports | 10 |
| PoE+ Ports | 8 × 10/100/1000 Mbps |
| PoE Port Numbers | Ports 1–8 |
| Gigabit Uplink Ports | 2 × 1000 Mbps |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE Power per Port | Up to 30 W |
| Total PoE Budget | 111 W |
| Auto-Negotiation | Supported |
| Auto-MDI/MDIX | Supported |
| Switching Capacity | 20 Gbps |
| Packet Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 4K |
| Jumbo Frame | 16 KB |
| Forwarding Method | Store-and-Forward |
| Flow Control | IEEE 802.3x |
| Extend Mode | Up to 250 m |
| Extend Mode Speed | 10 Mbps |
| Priority Mode | Ports 1–2 |
| Isolation Mode | Supported |
| PoE Auto Recovery | Ports 1–8 |
| Cooling | Fanless |
| Enclosure | Metal |
| Installation | Desktop / Wall Mount |
| Physical Security Lock | Yes |
| Power Adapter Input | 100–240 VAC, 50/60 Hz |
| Power Adapter Output | 54V DC / 2.22A |
| Dimensions | 209 × 126 × 26 mm |
| Max Power Consumption with 111W PD Load | 129.4 W |
| Certifications | CE / RoHS |
| Operating Temperature | -10°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Humidity | 5%–90% RH, Non-Condensing |
Main Benefits
Full Gigabit PoE Networking
Unlike PoE switches where the powered-device ports are limited to 100 Mbps, the MS110GMP provides Gigabit Ethernet on all eight PoE+ ports, making it better suited to high-resolution IP cameras, fast access points, and other higher-bandwidth equipment.
Eight Powered Device Connections
Eight PoE+ interfaces allow a relatively large group of cameras, access points, or IP phones to receive data and electrical power directly from one switch.
Powerful 111 W PoE Capacity
The 111 W total PoE budget gives the MS110GMP substantially more available PoE power than smaller 40 W or 65 W models.
Two Gigabit Uplinks
Two additional Gigabit ports provide dedicated high-speed connectivity to a router, NVR, server, or upstream network without consuming the eight PoE device ports.
Long-Range Surveillance Deployment
Extend Mode can increase supported power and data transmission distance to 250 meters, useful when cameras are positioned far from the main networking equipment.
Automatic PoE Recovery
PoE Auto Recovery can automatically restart supported unresponsive devices, helping reduce manual maintenance.
Traffic Isolation and Priority
Isolation Mode can separate camera/device groups, while Priority Mode prioritizes ports 1–2 for important network traffic.
Silent Operation
The fanless cooling design eliminates cooling-fan noise and reduces moving components.
Recommended Uses
- CCTV Surveillance Systems
- High-Resolution IP Cameras
- Network Video Recorders — NVR
- Wireless Access Points
- IP Phones
- Small and Medium Offices
- Retail Stores
- Restaurants and Cafés
- Hotels and Dormitories
- Warehouses
- Parking Areas
- Small Businesses
- Home Surveillance
- Long-Distance PoE Deployments
- Gigabit PoE Networks
Package Contents
- 1 × MERCUSYS MS110GMP 10-Port Gigabit PoE+ Switch
- 1 × Power Adapter
- Rubber Feet
- 1 × Installation / Quick Installation Guide




Reviews
There are no reviews yet.