Description
The OET-213H-BTS1-BD pairs the Uniview OET-213H face recognition terminal with the OEP-BTS1 digital detection module. Users are identified by face, card, password or QR code, while the module measures wrist temperature without contact.
Fast, Accurate Face Recognition
Deep-learning algorithms provide 1:N offline recognition against a whitelist of up to 10,000 faces, with recognition in about 200 ms. The dual-lens 2MP WDR camera with an F1.6 wide-angle lens and anti-spoofing protection resists photo and video attacks. Recommended mounting height is 0.8–2.2 m, with a recognition distance of 0.2–2.9 m.
Non-Contact Temperature Screening
The digital detection module measures wrist temperature from 30 °C to 45 °C at a distance of a few centimetres, with abnormal-temperature warnings. Access rights can be tied to temperature thresholds, and body temperature can be bound to personnel records. Mask detection is also supported.
Large Capacity and Easy Management
The terminal stores up to 10,000 faces, 100,000 Mifare 1 cards and 8,000 events with images (30,000 without images, per the supplied listing) on 4 GB of storage. Records are saved locally and uploaded in real time over the 10/100 Mbps Ethernet connection.
Complete Access Control Interfaces
Wiegand input and output, RS-485, two alarm inputs, one alarm output, USB 2.0, and lock, door contact and exit button connections allow direct door control or integration with third-party controllers. Tamper alarms, door-open timeout alerts and fire-alarm door release improve safety.
Key Features
- Face recognition access control terminal
- Bundled digital wrist temperature detection module
- 7-inch touch screen, 600 × 1024
- Dual-lens 2MP 1080P camera with WDR
- Recognition time approx. 200 ms
- Anti-spoofing against photos and videos
- Face capacity: 10,000
- Card capacity: 100,000
- Event capacity: 8,000 with images
- 4 GB storage
- Mifare 1 card support
- Door opening by face, card, password or QR code
- Temperature range 30–45 °C
- Mask detection
- Temperature-based access rules
- Wiegand in/out and RS-485
- 2 alarm inputs / 1 alarm output
- Lock, door contact and exit button interfaces
- 10/100 Mbps Ethernet
- 12 V DC power
- IP54 protection (indoor use)
- Two-way audio with indoor monitor
Technical Specifications
| Brand | Uniview (UNV) |
|---|---|
| Model | OET-213H-BTS1-BD |
| Product Type | Face Recognition Access Control Terminal with Digital Detection Module |
| Operating System | Linux |
| Face Recognition Time | 200 ms |
| Face Capacity | 10,000 |
| Card Capacity | 100,000 |
| Storage Capacity | 4 GB |
| Event Capacity | 8,000 (with images); 30,000 (without images, per brief) |
| Card Type | Mifare 1 |
| Screen | 7-inch touch screen, 600 × 1024 |
| Camera | Dual lens, 2 MP, 1080P |
| Supplemental Light | LED soft light and infrared |
| Temperature Measurement Range | 30 °C to 45 °C |
| Temperature Accuracy | 0.1 °C |
| Temperature Deviation | 0.3 °C |
| Temperature Measurement Distance | 1 to 3 cm (wrist) |
| Authentication Modes | Face (1:N), card (1:N), face + body temperature |
| Door Opening Methods | Face, password, QR code, card |
| Mask Detection | Supported |
| Network | 10/100 Mbps adaptive Ethernet |
| Interfaces | LAN ×1, Wiegand in ×1, Wiegand out ×1, RS-485 ×1, alarm in ×2, alarm out ×1, USB 2.0 ×1, lock ×1, door contact ×1, exit button ×1 |
| Power Input | 12 V DC |
| Protection | IP54 (terminal and module) |
| Dimensions (Terminal) | 134.0 × 33.0 × 305.0 mm |
| Application | Indoor, no wind |
| Specs Source | Uniview OET-213H-BTS1 datasheet (Zhejiang Uniview, 2019; distributor-hosted PDF) + client brief |
Main Benefits
Touchless Entry
Face recognition and wrist temperature screening without physical contact.
Health Screening at the Door
Abnormal temperatures trigger warnings and can block access.
Fast Throughput
About 0.2 s recognition keeps queues moving at busy entrances.
Secure Identification
Anti-spoofing defeats photo and video attacks.
Flexible Credentials
Face, card, password or QR code suit every user.
Easy Integration
Wiegand, RS-485 and alarm I/O connect to existing access systems.
Recommended Uses
- Office building entrances
- Schools and universities
- Hospitals and clinics
- Factories and plants
- Government buildings
- Hotels
- Residential compounds
- Gyms and clubs
- Banks
- Data centres
Package Contents
- 1 × OET-213H face recognition access control terminal
- 1 × OEP-BTS1 digital detection module




Reviews
There are no reviews yet.